© 2017 KIM LIGHTING
• 17760 ROWLAND STREET, CITY OF INDUSTRY, CA 91748 • TEL: 626/968-5666
PAGE 8
Lightvault
®
RGBW LTV81/LTV82 RGBW
Installation Instructions
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kim Lighting is under license. Other trademarks and trade names are those of their respective owners.
Apple, the Apple logo, iPad, iPhone, and iPod Touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
Trouble pairing device and KIM REMOTE with fixture.
1.
When pairing initially, stand as close as possible to the fixture.
2.
Power down fixture for 15 seconds and power back on.
3.
Pair one device at a time.
4.
Close app. To do this on an Android device go to Settings > Applications (or Aplications Manager) > Downloaded >
KIM REMOTE > Force Stop. To do this on an Apple device (iOS 7): Push home button twice, find KIM REMOTE app,
hold the app icon and swipe up. To do this on an Apple device (iOS 6): Push home button twice, find KIM REMOTE
app, tap the X to close.
5.
We recommend using one type of bluetooth device (apple or android) when pairing.
When pairing multiple types of devices with the same fixture, power down the fixture for 15 seconds before
switching devices.
6.
A phone case/cover may interfere with the Bluetooth signal. Removing your case can significantly
improve connectivity.
Why won't it work on my iPhone 4 or iPad 2?
The Kim Remote app for Apple devices requires an Apple device that support Bluetooth low energy (BLE).
This includes iPhone 4S and above, iPad 3 and above and iPad mini.
Why did my dimming settings change?
The advanced electronics inside the LTV8 are designed to retain your settings for both dimming and aiming.
Note:
Each time you
connect
to the fixture with the KIM REMOTE app, dimming settings are automatically reset to
100%. Please follow the following steps.
1.
Power on fixture.
2.
Pair and
Connect
device.
3.
Aim and set dimming.
4.
Disconnect
the device. (This will store your settings in memory)
5.
Once settings are stored the fixture does not require power to retain settings.
For warranty see http://www.hubbelllighting.com/resources/warranty
