Page 2
Kim Lighting • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, Ca 91716-0080 • 626/968-5666 • FAX 626/330-3861
9. To adjust angle, loosen swivel
screw, do not disengage. Hold
fixture at desired angle and tighten
swivel screw. Fixture may be
aimed up or down.
Accent Light KLV205
Installation Instructions
*
90°
Note:
Swivel stem must be installed
with the mounting threads facing
down-to-horizontal. Fixtures may not
be installed with mounting threads
facing upward unless shielded from
rain or sprinklers.
*
LAMP INFORMATION
Cat. No.
Lamp Type
Max. Watts
KLV205
MR-16 Bi-Pin
75
10.Connect fixture
cable to main
system cable with
a sealed
connector.
KIM LIGHTING LIMITED WARRANTY
When installed in accordance with Kim Installation Instructions and accepted trade practices, the following shall apply:
General Product Limited Warranty Coverage
All material and component parts used in the manufacture of Kim Products, are warranted to be free from defects of material
and/or workmanship for a period of 1 year from date of sale, with the following exceptions:
uxiliary Equipment
All auxiliary equipment (such as lamps, ballasts, and transformers) provided by and/or included in Kim Products shall carry the
component manufacturer's warranty.
Copper and Bronze Landscape Components
Copper and Bronze Landscape fixture components shall be warranted against defects of material and/or workmanship, and
failure due to corrosion, for a period of 25 years from date of sale.
Composite In-Grade Components
Composite In-Grade fixture components installed below grade, shall be warranted against defects of material and/or
workmanship, and failure due to corrosion, for a period of 7 years from date of sale.
Aluminum Landscape Components
Aluminum Landscape fixture components not in direct contact with soil, shall be warranted against defects of material and/or
workmanship for a period of 3 years from date of sale. Aluminum fixture components in direct contact with soil shall be warranted
from defects of material and failure from corrosion for a period of 1 year from date of sale.
Limit of Liability and General Conditions
Only products which are installed, used and maintained in accordance with applicable Kim instructions, specifications and
accepted trade practices, are covered by the Kim Warranty. During the warranty period, with proof of purchase, Kim will repair or
replace with the same or similar product, at Kim's option, without charge. Labor costs are the owner's responsibility and are
excluded from this warranty. This warranty is void if the product is modified, tampered with, misapplied, poorly installed,
improperly maintained, or subjected to abnormal conditions.
Repair or replacement as provided under this warranty is the exclusive remedy of the purchaser. This warranty is in lieu of all
other warranties, expressed or implied, including any implied warranty of fitness for a particular application. Kim Lighting shall not
be liable to the purchaser for indirect or consequential damages.
How may we serve you better? Please let us know.
Visit our website at: www.kimlighting.com
Your concerns are important to us.
Additional wire and connectors may
be purchased from Kim Lighting.
KLV427 #12-2 Cable
KLV432 #8-2 Cable
KLV410 Connector
KLV411 Connector
Note:
Low voltage cable is intended
for shallow burial, maximum of 6"
(152 mm).
Drain Hole
(Must face down)
7. Replace lens (convex side out)
fitting lens gasket assembly into
the recess on fixture body.
Replace light shield over lens after
making sure the drain hole is
down, so water will not stand on
lens. Tighten opposing screws
progressively and evenly.
8. Loosen set screw, adjust fixture
rotation, and tighten set screw.
