Page 2
Kim Lighting • P.O. Box 60080 • 16555 E. Gale Ave. • City of Industry, CA 91716-0080 • 626/968-5666 • FAX 626/330-3861
Lamp Installation:
Make certain electrical supply is
OFF
before relamping.
1. To install lamp, remove four (4)
slotted head screws from bottom of
husk.
2. Remove top cap, louvers and
globe.
3. Install lamp of type and wattage
as shown on fixture label and
chart below. (See
"Caution"
on
front side of instructions.)
5. Replace globe, louvers, top cap
and screws.
!
Globe
Gasket
Louvers
Globe
Top Cap
Lamp
(Not supplied
by
Kim Lighting)
Fixture
Base
Riser
The Compact Bollard - EL150
Installation Instructions
Narrow
Flatblade
Screwdriver
Narrow Flatblade Screwdriver
KIM LIGHTING LIMITED WARRANTY
When installed in accordance with Kim Installation Instructions and accepted trade practices, the following shall apply:
General Product Limited Warranty Coverage
All material and component parts used in the manufacture of Kim Products, are warranted to be free from defects of material
and/or workmanship for a period of 1 year from date of sale, with the following exceptions:
Auxiliary Equipment
All auxiliary equipment (such as lamps, ballasts, and transformers) provided by and/or included in Kim Products shall carry the
component manufacturer's warranty.
Copper and Bronze Landscape Components
Copper and Bronze Landscape fixture components shall be warranted against defects of material and/or workmanship, and
failure due to corrosion, for a period of 25 years from date of sale.
Composite In-Grade Components
Compostie In-Grade fixture components installed below grade, shall be warranted against defects of material and/or
workmanship, and failure due to corrosion, for a period of 7 years from date of sale.
Aluminum Landscape Components
Aluminum Landscape fixture components not in direct contact with soil, shall be warranted against defects of material and/or
workmanship for a period of 3 years from date of sale. Aluminum fixture components in direct contact with soil, shall be warranted
from defects of material and failure from corrosion for a period of 1 year from date of sale.
Limit of Liability and General Conditions
Only products which are installed, used and maintained in accordance with applicable Kim instructions, specifications and
accepted trade practices, are covered by the Kim Warranty. During the warranty period, with proof of purchase, Kim will repair or
replace with the same or similar product, at Kim's option, without charge. Labor costs are the owner's responsibility and are
excluded from this warranty. This warranty is void if the product is modified, tampered with, misapplied, poorly installed,
improperly maintained, or subjected to abnormal conditions.
Repair or replacement as provided under this warranty is the exclusive remedy of the purchaser. This warranty is in lieu of all
other warranties, expressed or implied, including any implied warranty of fitness for a particular application. Kim Lighting shall not
be liable to the purchaser for indirect or consequential damages.
How may we serve you better?
Please let us know. Visit our website at:
www.kimlighting.com
Your input matters to us.
4.
CAUTION:
Always coat screws
with grease before re-
installing after initial
installation or future
relampings.
!
LAMP INFORMATION
Cat. No.
Lamp Type
Max. Watts
T-3 Bipin
20
T-4 Bipin
50
EL150
Failure to do so could cause screws
to freeze up and become
unremovable.
