CENTAURI ENERGY SERVER
User Manual - Model 30-2017/12/18-VERSION 1.0
17
be installed to ensure sufficient air flow in the room so that the equipment gets
adequate heat dissipation in case of rise in room temperature. In hot environments, it
is best to install an air-conditioner.
2.
To facilitate wiring, daily maintenance, diagnosis, and repair of the Server, please make
sure the safe space of the front and the back doors is reserved (advisable space is 1000
mm or more to ensure that the door of the Server can be fully opened, and the
technicians can pass the freely).
Wall
Fig 4 Schematic Diagram of System Installation
1.
The altitude is less than 1000 meters, otherwise, the derating of Server should be
used.
2.
In the environment the bearing capacity should be greater than the equipment
weight (The equipment weight is as shown in the technical specifications).
2.5
Cabinet Handling
Please remove the surrounding rat proof baffles below the machine at first, and then get
the mechanical arms of the special handling equipment (hoisting equipment, stackers or
forklift) with the sufficient lifting capacity (please see Table 4 for the total weight of the
Server) stretched into the bottom of the base of the equipment. When the mechanical arms
are stretched into the base in place, jack up the equipment and then place it in the
predetermined installation location.
