Page
3
4
Device Connection
Note
⚫
Rack-mounted equipment is equipped with dual power supplies, and can operate normally with only one power input
device. When dual power supplies are connected, it will be used as a redundant power supply backup.
⚫
Please make sure the camera is connected to the SDI IN port.
⚫
Loop is not a must, connect SDI OUT when you need to loop. After connecting the power cable, turn it on and off through
the corresponding power switch.
5
Device Discovery
5.1
Direct visit by default IP
The default fixed IP address of RE-1 V2 is 192.168.1.168. Please configure your computer network to
192.168.1.xxx when you use it for the first time, and then enter http://192.168.1.168/ in the browser to visit
Web UI.
SDI source
LOOP
Switcher
AC100~240V
Power Supply
PC
Power Cable
backup power
