Kiloview E1-s, Quick Start Manual, Page: 4 / 12

Page 3
Note
⚫
Please use the equipped power adapter to power the device. Other unqualified power supplies may damage the device.
⚫
Please make sure the camera is connected to the SDI IN port.
⚫
Loop is not a must, you can connect to the SDI OUT port when loop out is needed.
Device Discovery
5.1 Direct visit by default IP
The default fixed IP address of E1-s is 192.168.1.168. Please configure your computer network to
192.168.1.xxx when you use it for the first time, and then enter http://192.168.1.168/ in the browser to visit
Web UI.
5.2 Use the free tool ---ONVIF Device Manager
Step 1: Start ONVIF Device Manager, all devices in the network can be found in the left device list.
Step 2: Click the device in the device list, the device information will be displayed in the information bar.
Website for more information on E1-s video encoder
https://www.kiloview.com/en/support/E1-s
Download the ONVIF Device Manager for free
Visit the website https://sourceforge.net/projects/onvifdm/ to download and install ONVIF Device Manager. Please
follow the software operation guidelines for the download method/installation.
ONVIF Device Manager is a network video app for managing network video, network video storage and network
video analysis to realize services such as discovery device, media, imaging, analysis and PTZ.