Copyright © Changsha KILOVIEW Electronics CO., LTD. All rights reserved
D300
·
User Manual
7
Using HDMI cable to connect HDMI output interface with HDMI display.
4.3
Connect network
Connect one end of the network cable to the decoder NET 1, the other end is connected to the network
switch or the computer.
Note: There are two Ethernet ports that you can connect to different networks. Normally, it is
connected to NET 1.
5
Login and network configuration
5.1
Login to web page
First, you need to set the decoder and the computer to be on the same network segment so that the
computer can login to the decoder's web page. The default IP of decoder network port 1 is 192.168.1.168.
If the computer IP is not 192.168.1.* network segment, it is necessary to set the computer network port IP
to 192.168.1.* network segment.
The specific steps are as follows (Take Win10 as an example):
1)
Roll your mouse and click the network icon in the lower right corner, click on "Network and Internet
Settings" and then click on "Network and Sharing Center";