Unpacking and setup
Remove the scale from the box and place it on a firm, level surface.
Avoid locations with rapid temperature changes, excessive dust, moisture, air currents, vibrations,
electromagnetic fields, heat or direct sunlight.
NOTE: Ensure that the scale is level each time its location is changed.
Before using the scale for the first time, the internal rechargeable battery should be fully charged for at
least 12 hours.
Allow the instrument to warm up for 30 minutes prior to use.
Connect the supplied AC adapter to the power input receptacle. Plug the AC adapter into a power outlet
and the battery will begin charging. Do not operate the scale with the charger continuously plugged in.
Adapter should be used only for charging purposes.
If the scale will be stored or transported in the future, save the packaging material to ensure the best
possible protection for the scale.
Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate this equipment.
Contents
KWS 301 scale, adapter, rechargeable battery, manual
Weighing Operations
Illustration of display board
1.
“~”: Scale is stable.
2.
NET: Net weight.
3.
“→0←”: Zero.
4.
Charge: Red light indicates that the scale is being charged. Green light indicates that the battery is fully
charged.
5.
Lb: unit is lb
6.
kg/g: unit is kg/g
Function keys
a.
This is not a key but a label located on the right hand side of the scale to indicate where the
power switch is.
Calculates the former weighing results
Displays total weight
Unit key allows you to switch between kg or lb
ON
M+
enter
MR
U
