6
KPS MS AND KPS 2 MAN03312021
Performing TARE function:
Place an empty container on the scale and press
[TARE]
. The display will show a net value of “0”.
To clear the Tare value, press
[TARE]
with an empty platter.
Performing HOLD feature :
Press
[HOLD]
and a triangle will appear above NET triangle. Load the object on to the platform. Once the weight is
stable, the scale locks the weight automatically, even if you remove the object from the platter.
Press
[HOLD]
again to release HOLD feature.
Maintenance:
Cleaning :
Before cleaning, disconnect the power plug from the power outlet and remove the batteries from the appliance
to power off the unit.
• Clean with a damp cloth and a mild soap or similar agents if necessary, and buff it dry.
• Do not use any acids, alkalis or strong active solvents to clean the housing or the control panels.
Troubleshooting:
SYMPTOM
POSSIBLE CAUSE
REMEDY
Scale does not turn on
Battery discharged
Replace the battery or use the
adapter
Power cord not plugged in
properly
Check the power cord
connection and make sure it is
plugged in properly into the
power outlet.
Other failure
Have the scale serviced by a
Kilotech authorized service
center.
Poor accuracy
Unstable environment
Move the scale to a suitable
location. Refer to the manual
Specifications
Improper calibration
Perform calibration.
Service Information :
If the troubleshooting section above does not resolve or describe your issue, contact your authorized distributor.
