Kilotech 851340, Operation Manuals

Page: 19 / 22

19
Error codes
Err01:
The weight signal is too large.
Err02:
No proper data can be displayed.
Err03:
The weight signal is too small.
Err04:
Zero point is over the setting range.
Err05:
Zero point is below the setting range.
Err06:
Error in unit key operation.
Err10:
The EEPROM can’t be accessed.
Err11:
The parameters are not same with backup data.
Err12:
The setting parameter(s) is not in normal range.
Err20:
There is an error in calibration.
Err30:
ADC is over max. range.
Err31:
ADC is below min. range.
Err40:
Recall error, no content stored.
CAP.:
Capacity.
UOL.:
Voltage.
St.PLU:
To set and store the indirect unit price.
ADDR. :
PLU address.
Unit:
Weighing units.
Rc.PLU:
Recall indirect unit price.
OUT.P.R:
Data is out of printed barcode range.
Data.ch:
Data has been changed.
Save:
Data is being saved.
O.RANGE:
The data has been entered or the weight for tare weight is out of range.