9
(10) Hi/Lo Switch
When the rotating speed needs to be changed, set up the switch to Hi for the fastest rotation, and set
up the switch to Lo for slowest rotation. It's possible that the uncompleted shut-off occurs when the
switch is setup to Lo and the presetting torque is more than 50% of torque range. Please refer to the
following table.
Lo Switch
Shut-off
SKC-PTA-50
SKC-PTA-80
SKC-PTA-120
SKC-PTA-150
SKC-PTA-220
OK
1~3N m
4~6N m
6~9N m
4~9.5N m
8~15N m
NG
3N m↑
6N m↑
9N m↑
9.5N m↑
15N m↑
(11) Hole for wrist band
Enable to install the wrist band which is more convenient and safer for users.
2.
Auxiliary handle
For easier use of the screwdriver, there is a handle for assisting purpose.
Warning, this power screwdriver delivers high torque, please install the handle before
doing work in order to avoid danger. We are not responsible for any damage or injury
caused by using this product without handle.
(1) Installing the base (2) Installing the handle (3) Complete
Other Cautions
1.
The best condition of using the tool is under 8 hours a day, do not over loaded.
2.
Do not attempt to repair or disassemble this cordless screwdriver without authorization. Always have
the device serviced by assigned factory or qualified person in order to have the warranty effective
continually.
