42
SPECIFICATIONS
TOS8870A
7.5 Options
The following options are provided to the Tester.
1) Model RC01-TOS/RC02-TOS Remote Control Box
Model RC01-TOS or RC02-TOS Remote Control Box is for remote control of start/stop of test
operation of the Tester.
For remote control, connect the Control Box to the REMOTE connector on the front panel of the
Tester.
The RC01-TOS has one START switch; RC02-TOS has two START switches and the test starts as
you press both switches at the same time with your both hands, thereby enhancing the operating
safety.
■
Functions of switches
OPERATE switch
This switch enables (when ON) or disables (when OFF) the START switch or switches.
START switch
The test starts as you press this switch (or switches) when the OPERATE switch is ON and
the Tester is in the READY status.
STOP switch
This switch terminates the test (cuts off the test voltage or resets the Tester from the FAIL or
other particular status — its functions are the same with those of the STOP switch on the front
panel of the Tester.)
■
Dimensions
RC01-TOS :200 W
×
70 H
×
39 D mm (7.9 W
×
2.8 H
×
1.5 D in.)
RC02-TOS :330 W
×
70 H
×
39 D mm (13 W
×
2.8 H
×
1.5 D in.)
Fig.7-2
RC01-TOS
RC02-TOS
