Kikusui TOS5200 User Manual Download

Page: 3 / 82

TOS5200

Notes to the supervisor

• If the operators cannot understand the language used in this manual, translate the

manuals into the appropriate language.

• Make sure that the operators understand the information in this manual before they

operate this product.

• Keep this manual close to the product so that the operators can read the manual at

any time.

• If the tester will be used to repeatedly perform tests with fixed conditions, such as

when being used as part of a manufacturing line, attach the protection cover to
ensure safe operation of the tester. This is useful in preventing incorrect operation of
the tester.

You will receive a potentially fatal electric shock if:

• You touch an output terminal while output is being generated.

• You touch a test lead that is connected to an output terminal while output is being

generated.

• You touch the device under test (DUT) while output is being generated.

• You touch a location that is electrically connected to an output terminal while output

is being generated.

You may receive a potentially fatal electric shock if:

• You operate the tester without grounding it.

• You operate the tester without using rubber gloves for electrical work.

• You come close to a location that is electrically connected to an output terminal

while output is being generated.

Dangerous Operations

Summary of Contents for TOS5200



















































































Search results

Summary of Contents for TOS5200

Reviews:

Related manuals for TOS5200

Brands by name

Popular brands

Kikusui TOS5200, User Manual

Search results

Summary of Contents for TOS5200

Reviews:

Related manuals for TOS5200

Brands by name

Popular brands