Kikusui TOS3200, User Manual

Page: 3 / 130

TOS3200
3
For the safe use and safe maintenance of this product, the fol-
lowing symbols are used throughout this manual and on the
product. Note the meaning of each of the symbols to ensure
safe use of the product. (Not all symbols may be used.)
or
Indicates that a high voltage (over 1000 V) is used here.
Touching the part causes a possibly fatal electric
shock. If physical contact is required by your work,
start work only after you make sure that no voltage is
output here.
DANGER
Indicates an imminently hazardous situation which, if
ignored, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if
ignored, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if
ignored, may result in damage to the product and other
property.
• The TOS3200 Leakage Current Tester is also simply
referred to as the TOS3200 in this manual.
• Equipment under test is also referred to as the EUT in this
manual.
• The word “PC” used in this manual is a generic term for per-
sonal computers and workstations.
• Touch current is simply referred to as TC in this manual.
• Protective conductor current is simply referred to as PCC in
this manual.
• The following markings are used in this manual.
Indicates a potentially hazardous situation which, if
ignored, could result in death or serious injury.
Indicates a potentially hazardous situation which, if
ignored, may result in damage to the product and other
property.
Indicates information that you should know.
Explanation of terminology or operation principle.
Indicates reference to detailed information.
>
Indicates the menu level of the item to be selected. The
menu item to the left of the > symbol is a higher level
menu.
SHIFT+key name (marked in blue)
Indicates an operation involving pressing the named key
(shown in blue) while the SHIFT key is held down.
SHIFT+Fx (F1 to F5)
Indicates an operation involving pressing a function key
(F1 to F5) while the SHIFT key is held down.
Shows that the act indicated is prohibited.
Indicates a general danger, warning, or caution.
When this symbol is marked on the product, see the
relevant sections in this manual.
Protective conductor terminal.
Chassis (frame) terminal.
On (supply)
Off (supply)
In position of a bi-stable push control
Out position of a bi-stable push control
Safety Symbols
Notations Used in This Manual
WARNING
CAUTION
See