Kikusui TOS3200, User Manual

Page: 23 / 130

TOS3200
23
2
In
st
allation and Prep
aration
Precautions Concerning Installation Location
Be sure to observe the following precautions when installing the product.
●
Do not use the product in a flammable atmosphere.
To prevent explosion or fire, do not use the product near alcohol, thinner or other combus-
tible materials, or in an atmosphere containing such vapors.
●
Avoid locations where the product is exposed to high temperature or direct sun-
light.
Do not install the product near a heater or in areas subject to drastic temperature
changes.
Operating temperature range: 0 °C to +40 °C (+32 °F to +104 °F)
Storage temperature range:
-20 °C to +70 °C (-4 °F to +158 °F)
●
Avoid humid environments.
Do not install the product in high-humidity locations near a boiler, humidifier, or water sup-
ply.
Operating humidity range: 20 %rh to 80 %rh (no condensation)
Storage humidity range:
0 to 90 %rh (no condensation)
Condensation may occur even within the operating humidity range. If this happens, do not
use the product until the condensation dries up completely.
●
Be sure to use the product indoors.
This product is designed for safe indoor use.
●
Do not install the product in a corrosive atmosphere.
Do not install the product in a corrosive atmosphere or in environments containing sulfuric
acid mist, etc. This may cause corrosion of various conductors and bad contacts of con-
nectors inside the product leading to malfunction and failure, or in the worst case, a fire.
●
Do not install the product in a dusty location.
Accumulation of dust may lead to electric shock or fire.
●
Do not use the product where ventilation is poor.
Secure adequate space around the product so that air can circulate around it.
●
Do not place objects on the product.
Placing heavy objects on top of the product may cause failures.
●
Do not install the product on an inclined surface or location subject to vibrations.
The product may fall or tip over causing damages and injuries.
●
Do not use the product in a location where strong magnetic or electric fields are
nearby or a location where large amount of distortion and noise is present on the
input power supply waveform.
The product may malfunction.
●
Use the product in an industrial environment.
This product may cause interference if used in residential areas. Such use must be
avoided unless the user takes special measures to reduce electromagnetic emissions to
prevent interference to the reception of radio and television broadcasts.