Kikusui PWX750ML, User Manual

Page: 7 / 110

PWX
7
Search by Topic
Troubleshooting
See “Troubleshooting” on page 102
• I want to check the accessories.
→
See “Checking the Package Contents”
or the included packing list.
p.2
• The installation space is limited, so I want
to check the installation conditions.
→
See the included “Safety Precautions”
document, or the electronic version of
the document on the CD-ROM.
–
• How do I connect the AC power supply? → “Connecting the Power Cord” p.12
• What kind of load cables should I use?
→
“Load Cables” p.17
• How do I ensure stable voltage when the
cables connected to the load are long (the
distance to the load is long)?
→ “Sensing”
p.20
• How do I rack mount the PWX750ML?
What kind of parts are needed?
→
“Rack Mounting”
p.14
• How do I use remote sensing to stabilize
the PWX750ML?
→
“Sensing”
p.20
• How do I set the protection functions to
prevent damage to the load?
→
“Protection Functions and Alarms”
p.30
• After a protection function has been acti-
vated, how do I restart tests automatically
when the cause of the alarm is fixed?
→
“Alarm occurrence and clearing alarms”
p.30
• How do I set the communication condi-
tions for remote control?
→
See the Communication Interface Man-
ual on the CD-ROM.
–
• How do I check the settings in preset
memory?
→
“Recalling preset memory entries”
p.48
• How do I reset the PWX750ML to its fac-
tory default settings?
→
“Factory Default Settings (Initialization)”
p.51
• How do I use the multichannel (VMCB)
function to construct a multichannel power
supply system?
→
See the Communication Interface Man-
ual on the CD-ROM.
–
• How do I use the PWX750ML as a con-
stant voltage power supply (CV mode)?
→
“Using the PWX750ML as a CV or CC
Power Supply”
p.29
• How do I use the PWX750ML as a con-
stant current power supply (CC mode)?
• How do I operate the PWX750ML at a
specific current? How do I save current
values to the preset memory?
→
“Preset Memory Function”
p.47
• How do I control the output voltage with
an external DC voltage?
→
“Overview”
p.54
• How do I monitor the output voltage and
output current?
→
“External Monitoring”
p.67
• How do I use parallel operation to
increase the current capacity?
→
“Master-Slave Parallel Operation”
p.70
• How do I prevent the settings from being
changed?
→
“Locking Panel Operations (Key lock)”
p.49
• How do I clean the PWX750ML?
→
See the included “Safety Precautions”
document, or the electronic version of
the document on the CD-ROM.
–
• How do I calibrate the PWX750ML?
→
“Calibration” p.82
Preparation
Setup
Operation
Maintenance