Kikusui PWX750ML, User Manual

Page: 46 / 110

46
PWX
CONFIG Settings
CF39 to CF41 MAC address display
These parameters display the set MAC addresses. These parameters are only displayed
when you are using the LAN interface. The MAC addresses are just displayed; they cannot
be set from the panel. To set a fixed MAC address, access the PWX750ML through a Web
browser. When you access the PWX750ML through a Web browser, do so under conditions
in which a DHCP server or AUTO IP can be used. MAC addresses are set to
00.0F.CE.xx.xx.xx (where x is a hexadecimal number between 0 and F).
For information about the Web browser interface, see the included CD-ROM.
CF42 SCPI-RAW protocol TCP port number setting
Set the TCP port number of the SCPI-RAW protocol for when the LAN interface is in use.
This parameter is applied when you turn the POWER switch off and on or when you execute
CF34. TCP port number 4880 cannot be used. When 4880 is specified, it is set to the factory
default value of 5025 when the settings are applied.
CF50 Vendor ID (VID) display
Displays the USB vendor ID.
CF51 Product ID display
Displays the USB product ID.
CF60 RS232C baud rate setting
Sets the RS232C baud rate. This parameter is applied when you restart the PWX750ML.
Parameter
number Display Description
CF39 00.0F Displays the first and second MAC address numbers
CF40 CE.xx Displays the third and fourth MAC address numbers
CF41 xx.xx Displays the fifth and sixth MAX address numbers
Display example of the MAC address “00.0F.CE.11.22.33:”
CF39: 00.0F
CF41: 22.33
CF40: CE.11
Value Parameter description
1000 to 9999 (except 4880)
TCP port number (factory default setting: 5025)
Display Description
0b3E 0x0B3E
Display Description
1025 0x1025
Value Parameter description
1.2 1200 bps
2.4 2400 bps
4.8 4800 bps
9.6 9600 bps
19.2 19200 bps (factory default setting)