Kikusui PLZ1004W, User Manual, Page: 186 / 216

9-8 Specifications PLZ-4W
9.2 General Specifications
Model PLZ164W PLZ334W PLZ1004W PLZ164WA PLZ664WA
Input voltage range 100 VAC – 240 VAC
(90 VAC – 250 VAC)
Single phase, continuous
100 VAC – 120 VAC /200 VAC – 240 VAC
(90 VAC – 132 VAC/180 VAC – 250 VAC)
Single phase
Input frequency range 47 Hz – 63 Hz
Power consumption 80 VAmax 90 VAmax 160 VAmax 450 VAmax
1500 VAmax
*1
*1. 900 VA when input voltage is 100 VAC.
Inrush current 45 A 80 A
Operating temperature range 0

C to 40

C (32

F to 104

F)
Operating humidity range 20 % - 85 % RH (without condensation)
Storage temperature range -25

C to 70

C (-13

F to 158

F)
Storage humidity range 90 % RH or less (without condensation)
Isolation voltage

500 V
Insulation
resistance Primary - input
terminal
500 VDC, 30 M

or more (ambient humidity of 70 % RH or less)
Primary - chassis 500 VDC, 30 M

or more (ambient humidity of 70 % RH or less)
Withstand
voltage Primary - input
terminal
No abnormalities at 1500 VAC for 1 minute.
Primary - chassis No abnormalities at 1500 VAC for 1 minute.
Dimensions (mm) See outline drawing
Weight
Approx. 7 kg
(15.43 lb)
Approx. 8 kg
(17.64 lb)
Approx. 15 kg
(33.07 lb)
Approx. 7.5 kg
(16.53 lb)
Approx. 16 kg
(35.27 lb)
Battery backup Backs up setup information
Accessories Power cord 1 pc. (with plug, Length: approx. 2.4 m)
Load input
terminal cover 1 piece
2 lock plates provided
Set of screws for
the load input
terminal
2 sets (bolts, nuts, and spring washers)
Setup Guide 1 piece (Japanese, English)
Quick Reference Japanese: 1 piece, English: 1 piece
CD-ROM
*2
*2. Contains Application & Samples, User’s manual, the Communication Interface Manual and KI-VISA.
1 piece
Safety
*3
*3. Does not apply to specially ordered or modified PLZ-4Ws.
Complies with the requirements of the following directive and standard.
Low Voltage Directive 2014/35/EU
*4
EN 61010-1
(Class I
*5
,
Pollution degree 2
*6
)
*4. Limited to products that have the CE mark on their panels. Not be in compliance with EMC limits unless the ferrite
core is attached on the cable for connection of J1 connector.
Electromagnetic compatibility
(EMC)
*3, *4
Complies with the requirements of the following directive and standards.
EMC Directive 2014/30/EU
EN 61326-1 (Class A
*7
)
EN 55011 (Class A
*7
, Group 1
*8
)
EN 61000-3-2
*9
EN 61000-3-3
*9
Under following condition.
The maximum length of all connecting cables and wires to the PLZ-4W series are less than 3 m.