Kikusui PFX2731S, Operation Manual

Page: 8 / 54

8
Operation Manual
PFX2731S
Overview
System Configuration
This chapter describes the Overview of the system and the procedure from charge/discharge test
preparation to test execution.
This product has six channels in one frame (one unit). The charge/discharge power in each channel is 6 V-
20 A. You can configure the charge/discharge test system with up to 24 channels by mounting four
PFX2731Ss and one control PC into a system rack. The channels are completely isolated from each other.
Each channel has a measurement function that enables continuous data acquisition and recording for up
to 10 ms.
Application software BPC4000 is used to configure, control and execute charge/discharge test conditions.
For details on the application software, see the corresponding manual.
DUT
battery
Temperature chamber (Espec)
BPC4000
PC
HUB
Frame
6ch
Power supply module
Electronic load module
Measurement, Protection,
Communication module
1 channel
1 frame (6ch)
Either
LAN port
RS-485 port
USB 㱻 RS-485 converter
USB
LAN
LAN
LAN
RS-485
6ch
6ch
6ch
Frame
6ch
Frame
6ch
BPC4000
Creating test conditions Test Condition Editor
Executing tests Test Executive