Kikusui PFX2500 Series, Operation Manual

Page: 57 / 144

PFX2512
57
Assigning IP Addresses
3
P
C
C
o
n
n
e
c
ti
o
n
an
d
H
a
rd
ware
C
o
n
fi
g
u
rat
io
n
Assigning PFX2512 IP addresses
To use a fixed IP address (when connecting through a switching hub or when connecting directly),
set the PFX2512 IP addresses using IO Config of BPChecker3000.
If you are using automatic IP address assignment (connecting through a router), you do not have to
set this address.
In the factory default settings, a value in the range of 192.168.1.101 to 192.168.1.107 is assigned to
the PFX2512 address. Duplicate IP addresses cannot be used.
For details, see the help file for IO Config of BPChecker3000.
1
Turn on the switching hub, PC, and then the PFX2512.
2
Start IO Config.
3
Click the channel selection search button, check that the PFX2512 you want to
configure is displayed, and then click Connect.
If it is not displayed correctly, it may not be connected correctly, or the channel
number may be overlapping.
4
Select the channel you want to configure, and open the IP address tab.
Enter the IP address, subnet mask, and default gateway.
Specify an IP address that is not being used by another device.
5
On the IP address tab, click Send.
The IP address is sent to the selected PFX2512.
IP address assignment is complete.
6
If you have other channels you want to use, repeat step 4 to step 5 .
7
When you finish configuring all the channels, turn the PFX2512 off and then
back on.
p. 58
To verify whether the IP address has been set correctly, check using the PFX2512 panel.
See