Kikusui PFX2500 Series, Operation Manual

Page: 37 / 144

PFX2512
37
2
C
o
nnec
ting and C
o
nfiguring De
vic
e
s
Connecting to the Electronic Load
p. 25
Connect the PFX2512 to the Electronic load using the cable with the solderless terminal and the I/F
cable.
This section explains an example of connecting a Kikusui PLZ-5W Electronic Load using the
optional SC005-PFX I/F cable for the PLZ-5W.
The cable is not included. For wiring precautions and other items to be considered, see the
electronic load operation manual.
Connecting the PFX2512 to an electronic load
1
Confirm that the POWER switch of all connected equipments are turned off.
2
Connect the cable with the solderless terminal to the DC EL + and the DC EL -
on the input/output terminal of the PFX2512. The solderless terminal (M6)
with a red cap is connected to the DC EL + terminal, and the solderless
terminal (M6) with a white cap is connected to the DC EL - terminal.
Pull out the cable in horizontal angle and fix it by screws.
See
Cable with M6 solderless terminal
(+: Red)
Cable with M6 solderless terminal (–: White)
Screw (M6x14)
Tightening torque: 3.0 N ・ m
To Electronic load
– terminal
To Electronic load
+ terminal