KIKUSUI Electronics Corp.
140
SENS:CURR:HOLD:TIME
Sets the hold time of the peak current.
Command
SENSe:CURRent[:PEAK]:HOLD:TIME {<numeric>|INFinity}
SENSe:CURRent[:PEAK]:HOLD:TIME?
Parameter
Value:
1 to 10
Hold time (The default value is 1)
11 s or higher or INFinity
Infinite
Unit:
S
Settings are reset to default values when an *RST command is sent.
Example
SENS:CURR:HOLD:TIME 2
Response: NR3
R9.37 when the hold time is set to infinity.
