1
2
3
4
7
5
8
6
9
10
12
15
21
22
23
24
25
16
17
11
13
14
18
19
19
20
PCR-LE PCR-LE2
Quick Reference
Z1-006-102, IB027724
Sep. 2017
The newest version of the
operation manual can be
downloaded from Kikusui website.
http://www.kikusui.co.jp/en
Name
Function
1
OUTPUT key
Turn output on and off
2
Display
Display the settings/ measured value
3
Numeric keypad
Enter numeric values directly
4
ON PHASE key
Set the output on phase
5
RANGE key
Switch output voltage range
6
SYNC key
Set the synchronization function
7
OFF PHASE key
Set the output off phase
8
KEYLOCK key
Lock and unlock the keys
9
RESET key
Reset the product
10
SLEEP key
Set the sleep mode
11
LOCAL key
Switch between remote and local mode
12
+/- key
Switch the polarity of the voltage
13
DIGIT key
The cursor moves to the left
14
CLR key
Clear the numeric keypad input
ALM CLR key
Clear alarms
15
F key
Set the frequency
PHASE key
Switch different displays during multiphase
operation (optional)
Name
Function
16
I key
Configure the current settings
I/P/
λ
-MEAS key
Switch the current/power measurement mode
17
V key
Configure the voltage settings
V-MEAS key
Switch the voltage measurement mode
18
ESC key
Cancel operations
19
Detachment button Detach the control panel
20
Function key
Correspond to the menus on display
21
MEMORY key
Save/Load settings from memory
OHTERS key
Configure advanced operation settings
22
SHIFT key
Enable the functions that are indicated in the
bottom row to the left of each key
23
ENT key
Apply settings
24
SIM key
Configure power line abnormality simulations
SEQ key
Configure sequence operations
25
OPR MODE key
Configure the operation environment settings
CONFIG key
Specify the configuration settings
Main specifications
1P: Single-phase input/output, 1P3W: Single-phase three-wire output, 3P: Three-phase output, 3P3W: Three-phase three-wire input, 3P4W: Three-phase
four-wire input
TYP: Typical values that are representative of situations where the PCR-LE/PCR-LE2 Series operates in an environment with an ambient temperature of 23 °C.
Item
PCR
500LE
PCR
1000LE
PCR
2000LE
PCR
3000LE
PCR
4000LE
PCR
6000LE
PCR
9000LE
PCR
6000LE2
PCR
9000LE2
PCR
12000LE2
PCR
18000LE2
PCR
27000LE2
Input ratings (AC rms)
Voltage
1P
100 V input type: 85 Vac to 132 Vac,
200 V input type: 170 Vac to 250 Vac
170 Vac to
250 Vac
--
170 Vac to
250 Vac
--
3P3W
--
170 Vac to 250 Vac
3P4W
--
187 Vac to 250 Vac (Phase voltage)
Frequency
47 Hz to 63 Hz
Apparent power
Approx.
0.93 kVA
Approx.
1.8 kVA
Approx.
3.6 kVA
Approx.
5.5 kVA
Approx.
7.3 kVA
Approx.
10.6 kVA
Approx.
15.7 kVA
Approx.
10.6 kVA
Approx.
15.7 kVA
Approx.
23 kVA
Approx.
33 kVA
Approx.
48 kVA
AC mode output ratings (AC rms)
Voltage
Output L range: 1 V to 150 V, Output H range: 2 V to 300 V
Resolution
0.1 V
Maximum
current(Output
L range, H
range)
*1
1P
5 A,
2.5 A
10 A, 5
A
20 A,
10 A
30 A,
15 A
40 A,
20 A
60 A,
30 A
90 A,
45 A
60 A,
30 A
90 A,
45 A
120 A,
60 A
180 A,
90 A
270 A,
135 A
1P3W, 3P ---
20 A,
10 A
30 A,
15 A
40 A,
20 A
60 A,
30 A
90 A,
45 A
Power capacity 1P
500 VA
1 kVA
2 kVA
3 kVA
4 kVA
6 kVA
9 kVA
6 kVA
9 kVA
12 kVA
18 kVA
27 kVA
1P3W
---
4 kVA
6 kVA
8 kVA
12 kVA
18 kVA
3P
6 kVA
9 kVA
12 kVA
18 kVA
27 kVA
Maximum peak current
Max. current (rms) × 4 (TYP)
*2
Maximum reverse current
*3
30 % of the max. current (rms)
Frequency
*1
1 Hz to 999.9 Hz
*4
Resolution
0.01 Hz (1.00 Hz to 100.0 Hz), 0.1 Hz (100.0 Hz to 999.9 Hz)
DC mode output ratings
Voltage (output L range, H
range)
1.4 V to 212 V, 2.8 V to 424 V
Resolution
0.1 V
Maximum
current(Output
L range, H
range)
*5
1P
3.5 A,
1.75 A
7 A,
3.5 A
14 A,
7 A
21 A,
10.5 A
28 A,
14 A
42 A,
21 A
63 A,
31.5 A
42 A,
21 A
63 A,
31.5 A
84 A,
42 A
126 A,
63 A
189 A,
94.5 A
1P3W
---
14 A,
7 A
21 A,
10.5 A
28 A,
14 A
42 A,
21 A
63 A,
31.5 A
Maximum instantaneous
current
Max. current (rms) × 3.6 (Limited by the rated output current’s rms value)
Power capacity 1P
350 W
700 W
1.4 kW
2.1 kW
2.8 kW
4.2 kW
6.3 kW
4.2 kW
6.3 kW
8.4 kW
12.6 kW 18.9 kW
1P3W
---
2.8 kW
4.2 kW
5.6 kW
8.4 kW
12.6 kW
Output voltage waveform distortion ratio, Output voltage response speed
Output voltage
waveform
distortion
ratio
*6
FAST
0.2 % or less
--
MEDIUM
0.3 % or less
0.5 % or less
Output voltage
response
speed
*7
FAST
20 μs (TYP)
--
MEDIUM
30 μs (TYP)
50 μs (TYP)
General
Input terminal
Inlet
M4
M5
M8
M8
M8
*8
M5
M8
*8
M5
M8
M8
M8
Output terminal
M4
M4
M4
M5
M5
M8
M8
M8
*9
M8
*9
M8
M8
M8
*1
. When the output voltage is between 1 V and 100 V or 2 V and 200 V and the load power factor is between 0.8 and 1. When the output voltage is
between 100 V and 150 V or 200 V and 300 V, the output current is reduced by the output voltage. When the load power factor is between 0 and 0.8, the
output current is reduced by the load power factor. When the output frequency is between 1 Hz and 40 Hz, the output current is reduced by the output
frequency.
*2
. For capacitor-input rectifier loads, (at near the peak of the voltage waveform, excluding three-phase three-wire output). The peak current
that can be output decreases in accordance with the reduction in the absolute value of the instantaneous output voltage.
*3
. When the output voltage is
100 V or 200 V and the output frequency is between 40 Hz and 999.9 Hz (reverse current is -180 deg out of phase with the output voltage).
*4
. 1 Hz to 500
Hz when a 3P05-PCR-LE (500HZ LMT) is installed in the PCR-LE and on the PCR-LE2 500HZ LMT model (during three-phase output).
*5
. When the output
voltage is between 100 V and 212 V or 200 V and 424 V, the output current is reduced by the output voltage.
*6
. When the output voltage is between 80
V and 150 V or 160 V and 300 V and the load power factor is 1.
*7
. When the output voltage is 100 V or 200 V, the load power factor is 1, and the output
current changes from 0 A to the rated value and from the rated value to 0 A.
*8
. Three-phase three-wire or Three-phase four-wire input: M5
*9
. Single-phase
three-wire or Three-phase input: M5
The accompanying CD-ROM describes the following
information.
Two-phase output setting PCR-
LE optional
Voltage compensation function
Harmonic current analysis
function
Generating special waveforms
(waveform bank)
Setting the output impedance
Setting soft starts (the voltage
rise time)
Fixing the internal Vcc
Selecting the response
Controlling the Output Using
External Analog Signals
(Optional)
Remote control
Sequence tutorial
Options
Troubleshooting
Maintenance
Factory default settings
Alarms/ Trouble
Specifications
Table for power line abnormality
simulation settings
Table for sequence settings
MANUAL
Alarms/Trouble
When a protection function is activated, an alarm (ALM-xx) or a
trouble indication (TRBL-xx) is generated, and the output is turned
off.
Alarm: Press ALM CLR(SHIFT+CLR) to clear the alarm, and then fix
the problem that caused the alarm.
Trouble: To clear the trouble indication, turn the POWER switch off,
wait at least 5 seconds, and turn it back on. If the same trouble
persists, contact your Kikusui agent or distributor to request repairs.
PCR-LE
manual
PCR-LE2
manual
