Kikusui PAX35-10, Operation Manual

Page: 158 / 204

Chapter 5. PANEL DESCRIPTION
5-8
6 Product No.
Indicates the serial number of the power supply.
7 INPUT terminals
The terminals of the AC input power circuit of the power supply.
L Live
N Neutral
GND Ground
FILTER GND Noise filter ground
WARNINGS
• In order to prevent electric shock hazards, be sure to ground the GND terminal of
the power supply by connecting to it the GND wire (green) of the AC input power
cable which accompanies the power supply.
• Unless the power supply is grounded, electric shock hazards can result. Make it
double sure that the power supply is securely grounded.
• Do not touch the AC power input terminals.
• The task of connecting the AC input power cable to the power supply and to a
power distribution panel involves danger. The task must be undertaken only by
qualified electronics personnel.
• Be certain that the terminal cover has been put on. Do not operate the power
supply with its terminal cover removed.
8 AC input ratings
9 Instrument weight
10 Air outlet
An outlet of cooling air. Note that hot exhaust air (room tempe up to approximately 40˚C) comes of
the outlet.
Caution
• Do not touch the air outlet. Do not block the hot air flow that comes out of the
outlet.
• The exhaust air temperature may become high (room tempe up to ap-
proximately 40˚C) depending on the load. Do not put behind the power supply
any objects which are not heat resistant.
11 Cooling fan