OT01-PCR-LA/2
Single-phase, Three-wire Operation 6-5
Indication when the output voltage exceeds 10 kW
Example: For 12000 W
(In OT01-PCR-12000LA/2 parallel operation)
“E3” stands for 10
3
(k, kilo) represented in exponential form. This exam-
ple represents 12.0 x 10
3
= 12000 W.
6.6
Memory Function
• The memory function is available only in the phase voltage display mode.
• The U-phase power supply allows the voltage and frequency to be stored in the
memory.
• The V-phase power supply allows only the voltage to be stored in the memory.
• The voltage read from the U-phase power supply memory is set to all phases.
6.7
Key-lock Function
The key-lock function locks keying operations on the control panel. This function
works singly for each phase. Even when the key-lock function is activated, the
OUTPUT can be turned ON/OFF.
Key-lock procedure
1.
Press the ESC key to select the Home Position.
2.
Press the KEYLOCK (SHIFT, 4) key.
This causes the PCR-LA power supply to enter the key-lock mode, and the
KEY LOCK indication to light up on the control panel.
3.
To cancel the key-lock mode, press the KEYLOCK (SHIFT, 4) key
again.
• The PCR-LA power supplies store the key-lock mode setting. If a PCR-LA power
supply is in the key-lock mode when the SYSTEM POWER switch is turned OFF,
this AC power supply also enters the key-lock mode when the SYSTEM POWER
switch is turned ON next time.
• The key-lock mode is deactivated in the initial setup status.
W
NOTE
Summary of Contents for OT01-PCR12000LA/2
