LTP-2
1
LOW OHM TEST PROBE
LTP-2
INSTRUCTION MANUAL
1.
GENERAL
MODEL LTP-2 Low Ohm Test Probe is an optional accessory device
for TOS6100 ( or Model 872) AC Low Ohm Tester. The probe has a
probe-side cable and a clip-side cable. To reduce the residual
resistance in measurement, voltage sampling is done at the root of the
test pin for the probe-side cable and at the root of the clip for the clip-
side cable.
On its main body the probe has START/STOP switches for remote
operation. The functions of the switches are identical with those of the
START/STOP switches of TOS6100 Tester ( or with those of the
TEST/RESET switches of Model 872 Tester).
2.
SPECIFICATIONS
Cable length:
Approx. 2m
Probe Dimensions:
Dia. approx. 19mm,
Length approx. 150mm
Residual Resistance:
< 10m
Ω
Remote Operation:
START/STOP switches (TEST/RESET switches)
