Mounting the device
●
Mount the device on the front and rear horizontal rails
Lift the device a little, and make sure that the stopper fittings
⑧
that you
attached to the bottom of the device do not make contact with the front
horizontal rail
④
.
Insert the stopper fittings
⑧
into the groove of the rear horizontal rail
⑤
.
Make sure that the tabs on the bottom of the device are inserted into the
groove of the front horizontal rail
④
.
●
Attach the mounting rail
Push the mounting rail
⑥
in the direction indicated by the arrow, and insert the
tabs on the bottom of the device into the groove of the mounting rail.
Secure the mounting rail
⑥
in place using four bolts
⑦
.
Preventing the device from shifting sideways
If the device is narrower than the width of the rack, attach metal brackets to prevent the device from shifting sideways.
●
Attach the metal brackets
Insert the metal brackets (
⑨
and
⑩
) into the groove of the rear horizontal rail
⑤
.
Attach a pair of metal brackets (
⑨
and
⑩
) to the left side of the device, and do the
same for the right side.
Securely connect the metal brackets (
⑨
and
⑩
) to the device using screws (
⑫
and
⑬
).
Attaching the blank panel (option)
Insert the tabs on the bottom of the blank panel into the groove of the front
horizontal rail
④
.
Push the mounting rail
⑥
in the direction indicated by the arrow, and insert the
tabs on the bottom of the device into the groove of the mounting rail.
Secure the mounting rail
⑥
in place using four bolts
⑦
.
Securely connect the blank panel to the front horizontal rail
④
using the screws
that came with the blank panel (M3×10).
Rack mounting the device
Use the raised countersunk head screws (
⑭
;
M5×14) and cup washers
⑮
.
If the device is heavy, attach support angles
to the rack as shown in the figure.
Specifications
Item
Specification
Load weight
20 kg (44.09 ib.) or less
Weight
KRA2
Approx. 1.0 kg (2.20 Ib.)
KRA100
Approx. 1.2 kg (2.65 Ib.)
4
5
8
Tab
Device
6
7
Tab
Device
13
12
10
9
5
7
6
4
M3×10
(accessory)
BLANK PANEL
(option)
(Appearance)
MIN 400
Inner rack dimension
Support angle
KRA2
KRA100
KIKUSUI ELECTRONICS CORP.
1-1-3 Higashiyamata, Tsuzuki-ku, Yokohama,
224-0023, Japan
Tel: +81-45-482-6353
Fax: +81-45-482-6261
www.kikusui.co.jp/en
