Kikusui KHA1000, Operation Manual, Page: 166 / 274

6-10
KHA1000
6.2.1 View Types, View Setting, Segment Browse, and View
Area
Menu
"4.3 Basics of
Menu Operation"
Select a view type.
Page 6-11,
Page 6-12
The sub-menu varies depending on the selected view type. For details, see "View
Setting – > Sub Menu" on page 6-11.
Use this menu for analysis when the view type is CPF Waveform, dc Waveform,
dmax Waveform, Tmax* Waveform, Flicker List, Results List, or Voltage
Fluctuation List (Manual). It is used to switch/select a segment (= time for one Pst
measurement session).
*Displayed as d(t)>3.3% depending on the selected standard.
Page 6-3
The input range is 1 to 12 when the d measurement method is Pst Auto, or 1 to 24
when the d measurement method is Manual. When the view area is divided, a
common value is set for all windows.
To select divided windows, use the arrow keys (up, down, left, right).
The selected window is indicated with a red frame. It is automatically selected in the
1-screen.
F 1 F 1
F 2 F 2
F 3 F 3
F 4 F 4
F 5 F 5
F 6 F 6
Page 1/1
See
F1 View Type
V/I
Waveform
rms
Waveform
List
Pinst (St)
Waveform
CPF
Waveform
dc
Waveform
dmax
Waveform
Tmax
*1
Waveform
*1.Displayed as d(t)>3.3% depending on the selected standard.
Flicker List
Results
List
VF List
(Manual)
F2
View Setting

Sub Menu
Menu corresponding to the view type
See
F3 Browse Segment
Numeric
value
See
F5 View Area 1-Screen 2-Screen 4-Screen