Kikusui KHA1000, Operation Manual, Page: 168 / 274

6-12
KHA1000
View Setting

Sub Menu
A different sub-menu is displayed depending on the view type selected. The sub-
menus for the CPF Waveform, dc Waveform, dmax Waveform, Tmax* Waveform,
Flicker List, Results List, and Voltage Fluctuation List (Manual) are shown below.
*Displayed as d(t)>3.3% depending on the selected standard.

CPF Waveform
Page 6-3
Move the segment (= time for one Pst measurement session) location along the time
axis in the CPF (cumulative probability) graph. The input range is 1 to 12 when the
d measurement method is Pst Auto.
When the d measurement method is Manual, Pst is not measured. Although 1 to 24
can be input, no CPF waveform is displayed (“No waveform data is available” is
displayed).

dc Waveform, dmax Waveform, and Tmax
*1
Waveform

Flicker List
F3 Browse Segment
Numeric
value
See
F1 Axis X
×10 ×5 ×2 ×1
×1/2 ×1/5
Select the magnification to enlarge or reduce a view.
F2 Y-axis Scale
×10 ×5 ×2 ×1
×1/2 ×1/4
Select the magnification to enlarge or reduce a view.
F3 Browse Segment
Numeric
value
For dc Waveform, dmax Waveform, and Tmax
*1
Waveform, move the segment (= time for one Pst
measurement session) location along the time axis on
an individual basis.
*1.Displayed as d(t)>3.3% depending on the selected standard.
F4 Time Axis Scroll
Move along the time axis in the display by turning the
small or large knob.
F5 Scroll
Used to view a hidden part. Turn the small knob to
vertically scroll over the windows. This is used when
the display is divided into two or four screens.