Kikusui KDS6-0.2TR, Operation Manual

Page: 24 / 60

20 Basic Operations and Connections KDS6-0.2TR
3.2 Basic Operations
Channel selection
■
Selecting the channel for which voltage is to be set or output
current is to be displayed.
1. Press the CH SELECT key.
Voltage setting
■
Setting a voltage for the channel currently selected.
1. Turn the voltage control knob.
Changing range
■
Changing the current range of Channel 1
1. Press the RANGE key.
The RANGE key is active only when Channel 1 is selected. Channels 2 and 3
work the 30-mA range only.
The channel is changed each time the key is pressed,
and the LED of the channel currently selected is lit.
CH SELECT key
Voltage control knob
Turning the knob clockwise increases the
setting value, while turning it counter-
clockwise reduces the value.
The value changes with the rotation speed
of the knob. The faster the knob is turned,
the greater the change in voltage value.
RANGE key
Each time the key is pressed, the LED for RANGE is turned
alternately on and off. When the LED is on, the 200-mA range is
in effect; when the LED is off, the 10-mA range is enabled.