Kikusui KDS6-0.2TR, Operation Manual

Page: 19 / 60

KDS6-0.2TR Names and Functions of Parts 15
Chapter 2 Names and Functions of Parts
This chapter explains the names and operating methods of the different component
parts, as well as the basic functions of the display and other parts.
2.1 Front Panel
Fig. 2-1
[1] OUTPUT key
Pressing the key alternately turns the output on and off.
While output is activated, the LED above the key remains lit.
If the LED is flashing, it means that the overcurrent protection function (OCP) has
activated to interrupt output.
For more details on the OCP, refer to "OCP function" on page 22.
• The OCP function is activated when an over-range state lasts for approximately
1.5 seconds or longer.
[2] Chassis terminal
This terminal is connected to the chassis (frame) of the KDS6-0.2TR.
SLOW FAST SLOW FAST
[1] OUTPUT key
[2] Chassis terminal [3] Output connector
[6] RANGE key
[7] CH SELECT key
[10] SHIFT key
[4] Output ammeter
[5] Voltage setting
display
[8] Voltage
control knob
[9] LOCAL key
NOTE