HP21-TOS
3
1
Confirm that the probe is not con-
nected to the TOS3200.
2
Turn the holder counterclockwise.
3
Turn the pin clockwise all the way.
4
Turn the holder clockwise all the way.
When using the alligator clip
When you attach the included alligator clip to the test lead wire, remove the cap
beforehand. To remove the cap, use a flat-blade type pocket screwdriver. Insert the
tip of the screwdriver under the pawl of the cap, lift the pawl, and remove the cap.
Connecting to the TOS3200
When the probe is connected to the TOS3200, the TOS3200 becomes to the
equivalent condition as when the STOP switch is pressed, and the READY
indicator on the display turns off.
Fig.4
Connecting to the TOS3200
2.
3.
4.
Fig.3
Adjusting the pin
When removing the cap, be careful not to hurt
your hands with the flat-blade screwdriver.
CAUTION
Control cable
To the REMOTE connector
Test lead B
To measurement
terminal B
TOS3200
The power cord from EUT
To AC LINE OUT EUT
Cable A
To measurement terminal A
