Assembly Instruction
Step 1
1. Fasten front stabilizer (2) and rear stabilizers (3) each
with 2 carriage bolts (45) from the underside of
stabilizers. Secure with 2x- washers (46) to main
frame (1).
Step 2
1. Connect the upper computer cable (15) with lower
computer cable (16) securely
.
2. Unscrew the pre-assembled 3 hex. Bolts (47) &
washers (48). Put the handlebar post (4) into the
main frame (1) and fix it with 3 hex.bolts (47) &
washers (48).
Step 3
1. Plug the computer cable (upper) (15) with cable at
back of computer (14).
Slide computer (14) and fix it
onto the bracket at top of handlebar post (4) by 4
bolts (86)
.
2. Release knob (25) from fastener at back of
handlebar post (4). Open up the fastener and attach
handlebar (13) into fastener of handlebar post (4).
Select the desired position for handlebar (13), fasten
the knob (25) with washer (72) securely.
3. Plug hand pulse sensor wire (19) to jack at back of
computer (14).
Step 4
1. Attach seat post (7), to the seat bracket (10). Secure
with 4 bolts (49) tightly.
GB
GB
GB
GB
GB
- 3 -
