5
Other cautions
When you use this equipment, be careful of the following things.
•
This equipment is Lumitester Smart/PD-30/PD-20 exclusive use. Do not insert a
light source or blank tube in Lumitester PD-10. Or do not insert to other company
products.
•
Do not move this equipment during measurement. It may cause an error of
measurement.
•
Do not incline this equipment during measurement. It may cause a measured
value error.
•
Be sure to take out a light source after measurement.
•
Keep this equipment at least 50cm away from the electromagnetic noise source.
•
Do not expose this equipment to liquids, reagents, and organic solvents. That may
cause failure, discoloration and modification. If they are attached, wipe off immediately.
•
Use it in the range of temperature (10-30
º
C
) and humidity (20-85%).
*In case of Lumitester Smart/PD-30, turn off the temperature compensation
setting.
•
Do not use it at the place where temperature changes violently.
•
Do not use it at a place with sunlight or strong light. It may cause an error of
measurement.
•
Do not expose it to steam. Use it at the place without dewing.
•
Do not expose it to corrosive gas.
•
Use it at a place without vibration.
•
Use it at a place with little dust.
•
Do not put on unstable place or a dangerous place.
•
Do not fall it or give a strong shock.
•
Avoid the place where the wind of an air-conditioner hits directly.
