Kiierr 148 Pro, User Manual, Page: 7 / 26

Kiierr Devices
Page
7
Remove all components from the packaging. Plug the wall plug into one USB cord
and attach to the portable power pack until fully charged.
Place the laser cap inside the black hat provided in your box. Or you may place the
laser cap inside any standard size ball hat of your choosing.
After fully charging the portable power pack, remove the USB cord from the wall
charger and plug directly in to the laser cap. Make sure the USB is connected well to
the laser cap. Do not push the USB too hard in case it is inserted backwards.
After the portable power pack is connected securely to the laser cap, place the
laser cap on top of your head with the connected wire located in the back of
your head. The wire should be hanging vertically down your spine.
STEP 1
STEP 2
STEP 3
STEP 4
How To Use
BEFORE OPERATING PLEASE NOTE THE FOLLOWING: THE KIIERR 272 & 148 PRO LASER CAP
SHOULD NEVER BE CONNECTED DIRECTLY TO THE WALL CHARGER. THE CAP SHOULD ONLY BE
POWERED BY THE BATTERY PACK. THE BATTERY SHOULD BE CHARGED USING THE INCLUDED
CHARGING ADAPTER.
Rev.8.6.2018