*Fully loosen (do not completely remove) the four bolts on the Channel Clamp
* Insert both Gun Cart Leg assemblies through the Channel Clamp. Position the Gun Cart Leg assemblies
adjacent to each other through the Channel Clamp (as shown in detail below).
*Adjust the Gun Cart Leg assemblies to desired width.
*Fully (and equally) tighten all four Channel Clamp bolts.
Gun Cart Leg
assembly
Channel
Clamp
Gun Cart Leg
assemblies adjacent
to each other
*Insert the O-Ring into the groove on the Tube End
*Ensure the O-Ring is properly seated into the groove and
bolt the Gun Cart assembly to the Tube End
