KIFCO Water-Reel T/E210L Assembly Instructions Download Page 1

Page: 1 / 4

*Extend the tongue jack

*Bolt the Mount 3rd Wheel to the front of the chassis

*Insert the pin on the Front Yoke Assembly through the bottom of the Mount 3rd Wheel. Secure with
1” Washer and Cotter Pin

*Attach the Tongue to the Front Yoke using the Tongue Hinge Pin. Secure with 1” Washers and Cotter Pins

T/E210L & T/E230 ASSEMBLY INSTRUCTIONS

Tongue Jack

Mount 3rd Wheel

Front Yoke Assembly

Tongue

Tongue Hinge Pin

193-0297-0

Summary of Contents for Water-Reel T/E210L

Page 1: ...he bottom of the Mount 3rd Wheel Secure with 1 Washer and Cotter Pin Attach the Tongue to the Front Yoke using the Tongue Hinge Pin Secure with 1 Washers and Cotter Pins T E210L T E230 ASSEMBLY INSTRU...

Page 2: ...er through the Channel Clamp as shown in detail below Adjust the Gun Cart Leg assemblies to desired width Fully and equally tighten all four Channel Clamp bolts Gun Cart Leg assembly Channel Clamp Gun...

Page 3: ...ng Connect the Syn ex line labeled Lower line connected to the lower port on the Diaphragm Valve to the lower tting on the Actuator Valve Connect by pushing the end of the tube fully into the tting Sp...

Page 4: ...install the rigid tongue directly to the machine See instructions and never attempt to back up units with the front wheel installed The third wheel installed is designed for towed by lower horsepower...