Machine Winterization
Freezing will not damage the type of Polyethylene tube used on your Water-Reel
.
Even though the Tube does not need to be drained you must
drain all metal parts
.
Completely remove the Supply Hose from the Inlet fitting
B110G Model -
Open the Speed Control Valve to
the full open position. The Discharge Hose must be
removed to allow water to drain through the Discharge
Hose Fitting.
Open the Drain on the side of the Valve Assembly.
Temporarily remove the Bellows Tube from the fitting
below the Valve Assembly to empty the Bellows
and Tube. (See Tubing Removal on page 24 for
procedure). Reinstall the Bellows Tube.
Drain
Bellows
Tube
E110G Model -
Open Drain under Entry Fitting
Gun Cart - both models -
Pull around
3-4 coils of Tube off the Spool. Open
the Drain Plug located under the Gun
Cart. Rewind the Tube coils by hand.
Gun Carts with the optional water
shut down: open the Drain on the
Diaphragm Valve.
Drain plug
Drain on
Diaphragm
Valve
26
Speed Control
Valve
Drain
Valve Assembly
