KIESELMANN 406 Series, Operating Instruction

Page: 19 / 19

KIESELMANN GmbH | Operating instruction Appendix | 10
4x6x_DGKH_EN 19 / 19
1 0 A p p e n d i x
10.1 Declaration of incorporation
Declaration of incorporation
Translation of the original
Manufacturer / authorised representative: KIESELMANN GmbH
Paul-Kieselmann-Str. 4-10
75438 Knittlingen
Germany
Authorised representative:
Achim Kauselmann
(for compiling technical documents) Paul-Kieselmann-Str. 4-10
75438 Knittlingen
Germany
Product name Function
pneum. Lift actuators Stroke movement
pneum. Rotary actuators Rotary movement
Ball valves Media cutoff
Butterfly valves Media cutoff
Single seat valves Media cutoff
Flow control valves Control of liquefied media
Throttle valve Control of liquefied media
Overflow valve Definition of fluid pressure
Double seat valve Media separation
Bellow valves Sampling of liquids
Sampling valves Sampling of liquids
Two way valves Media cutoff
Tankdome fitting Prevention of overpressure and vacuum, Tank cleaning
Safety valve Prevention of overpressure
The manufacturer hereby states that the above product is considered as an incomplete machine in
the sense defined in the Directive 2006/42/EC on Machinery. The above product is exclusively in-
tended to be installed into a machine or an incomplete machine. The said product does not yet con-
form to all the relevant requirements defined in the Directive on Machinery referred to above for this
reason.
The specific technical documents listed in Appendix VII, Part B, have been prepared. The Authorized
Agent empowered to compile technical documents may submit the relevant documents if such a
request has been properly justified.
Commissioning of an incomplete machine must not only carried out if it has been determined that
the respective machine into which the incomplete machine is to be installed conforms to the regu-
lations set out in the Directive on Machinery referred to above.
The above product conforms to the requirements of the directives and harmonized standards spe-
cified below:
• Directive 2014/68/EU
• DIN EN ISO 12100 Safety of machinery
i.V. Uwe Heisswolf
Head of Development
Knittlingen, 21.07.2017