36
SEG
Operating Instructions
5 Mounting and dismounting
5.4.3
Electrical connection
Note!
For electrical connection of the pull-rope emer-
gency stop switches to Dupline
®
input module
,
see the operating instructions "Dupline
®
input
module for pull-rope emergency stop switches"
(for further details of this: see Section 4.4: „De-
vice identification“, page 26).
Preparatory work
1. Open the cover (
4
). To do this, loosen the two
screws (
9
2. Remove the protective plug from the screwed cable
gland (
11
).
3. Remove the screwed cable gland nut (
11
).
4. Remove any dirt from the cable and slide screwed
cable gland nut (
11
) onto the cable. The sealing
sleeve in the screwed cable gland (
11
) must not be
dirty or damaged.
Fig. 5-3:
Electrical connections
X1
X2
13
14
33
34
53
54
21
22
41
42
61
62
X1
X2
1
2
6
(N/O contact,
control circuit)
5
(N/C contact,
safety circuit)
12
Pull rope side
14
12
8
