Kieback&Peter TPC70 User Manual Download Page 8

Page: 8 / 8

Page 8 / 8

Product Description

TPC70

Datasheet 2.60-10.070-01-EN

Issue 2017-09-13

Updating the Software and Calibrating the Touch Panel

CAUTION

The update will restore theTPC70 to factory settings.
If necessary, make a note of the configuration before proceeding with the update.

The TPC70 firmware is part of the DDC4000e update as of version 1.16. To update the TPC70, use
the files "ST4K" and "UPDATE":

►

Decompress the ZIP files to the root of a USB flash drive.

►

Switch off the TPC70 by interrupting the power supply.

►

Insert the USB flash drive into the USB socket of the TPC70.

►

Start the TPC70.

“Update active” will be displayed during the update.
Touch panel calibration begins after about a minute.

►

Tap the middle of the displayed crosses.

►

Switch off the TPC70 by interrupting the power supply.

►

Remove the USB flash drive from the USB socket of the TPC70.

Summary of Contents for TPC70

Page 4: ... used for display black bars right and left when using devices DDC4200e DDC4400e and DDC4002e Dimensions Front Panel Cutout A recess with the following dimensions is needed in the switch cabinet to take on the TPC70 Connection 6 0 23 0 190 0 202 0 136 0 149 0 3 5 15 0 14 5 192 0 0 2 138 0 0 2 0V 12V 24V GND USB RJ45 ...

Page 5: ...ing WARNING Contact with live parts of electrical domestic installation can cause death due to electric shock Mounting removal may only be carried out when power is switched off The TPC70 can be mounted in the switch cabinet with four mounting brackets 1 2 3 4 5 6 7 8 9 10 10 11 11 12 12 ...

Page 7: ...D Configuring the display resolution Select Force classic style for dialogs in the TPC70 configuration The following options will become available request only classic dialogs from BMS QVGA request the optimum dialog style from the BMS WVGA or QVGA NOTE If a graphic is set as the screensaver for the automation station the TPC70 will use the same graphic as screensaver ...