A
Page 19 / 30
Datasheet 1.10-65.030-01-EN
RPW404P-FTL
Product Description
Issue 2017-04-03
Menu level
NOTE
If no settings are made within approx. 5 seconds, the individual setting functions are exited and saved
as required.
Config menu
The following functions are available in the Config menu:
■
Setting vacation mode
■
Setting the time and date
■
Setting the 12/24 hour display
■
Switching the temperature scale °C/°F
Setting vacation mode
►
Hold down the “Occupancy button” for 5 seconds.
The text “
Menu
” briefly appears on the display, followed by “
SETP
”.
►
Release the “Occupancy button”.
►
Briefly press the “Occupancy button” repeatedly or the “
”
button to select the “
Conf
” function.
►
Hold down the “Occupancy button” for 5 seconds.
►
Release the “Occupancy button”.
The “Set vacation” menu item appears in the display.
►
Hold the “Occupancy button” down for 5 seconds or
press the “
” or “
” button.
The value being set flashes.
►
Briefly pressing the “Occupancy button” or the “
” or “
” button
sets the vacation duration to a maximum of 31 days.
Briefly pressing the “Occupancy button” or the “
” button increases the current
value by +1. Briefly pressing the “
” button reduces the current value by -1.
Setting "00d" = 0 days deletes all previous settings.
The setting is accepted after 5 seconds of no entry being made. Vacation mode comes
into effect upon the end of the day at 0.00 hours.
The display switches back to initial display and the “suitcase” icon appears for
vacation mode.
