A
Page 22 / 24
Product Description
RBW322-FTL
Datasheet 1.10-60.015-01-EN
Issue 2016-05-16 ab V2.60
Deleting the wireless partner on the RBW322-FTL
►
Use the knob to select the “Delete” function
dEL
in the service level.
►
Press the knob until the radio icon on the display disappears (approx. 3 s).
All taught-in radio partners are deleted.
Operating and Malfunction Messages
NOTE
If the malfunction message
appears, the batteries of the MD15-FTL-xx must be changed or the
radio communication path must be checked. See chapter “General installation instructions”, page 6.
NOTE
Operating and malfunction messages have priority over the 12/24 hour display.
Icon on dis-
play
Explanation
Wireless communication with at least one taught-in MD15-FTL-xx wireless part-
ner has been interrupted for more than
one
hour.
If no signal is received from the MD15-FTL-xx for an extended period of time,
the display switches to
.
This warning disappears once the communication to the missing wireless part-
ner is re-established.
If the wireless communication to
all
taught-in wireless partners is interrupted,
the wireless icon is no longer displayed.
Wireless communication with at least one taught-in MD15-FTL-xx wireless part-
ner has been interrupted for more than
four
hours and a resynchronization has
failed.
This warning disappears once the communication to the missing wireless part-
ner is re-established.
If the wireless communication to
all
taught-in wireless partners is interrupted,
the wireless icon is no longer displayed.
Room control module system time is faulty.
Wireless communication to the taught-in EnOcean system gateway is inter-
rupted.
The battery capacity of at least one MD15-FTL-xx is too low (<10%).
The batteries of the wireless small actuator must be replaced.
If no signal is received from the MD15-FTL-xx for an extended period of time,
the display switches to
.
Room control module transmission function faulty, supersedes all other mes-
sages.
