Kieback&Peter RBW322-FTL Product Description Download Page 20

Page: 20 / 24

Page 20 / 24

Product Description

RBW322-FTL

Datasheet 1.10-60.015-01-EN

Issue 2016-05-16 ab V2.60

Software version display

►

Use the knob to select the “Software version display” function

The current software version is displayed.

►

Press the push-and-rotary knob briefly.

Displays the software version of internal processor 1.

►

Turn push-and-rotary knob.

Displays the software version of internal processor 2.

Teaching in the MD15-FTL-xx wireless partner and EnOcean gateway on the RBW322-FTL

NOTICE

This product description contains the specific settings and functions of the RBW322-FTL. In addition
to these instructions, the product descriptions of the MD15-FTL-xx radio partner and EnOcean
gateway must also be observed.

►

Select service level (see page 18).

►

Use the knob to select the “Teach-in” function

T: IN

■

Teach in wireless actuator

Up to 4 MD15-FTL-xx radio actuators can be taught-in on the RBW322-FTL.

►

Use the knob to select the “Teach-in radio small actuator” function

ACT

►

Press the knob.

The radio icon flashes.

►

A teach-in radio telegram has to be triggered on the MD15-FTL-xx. You can find

details in the documentation of the MD15-FTL-xx.

►

If multiple MD15-FTL-xx radio small actuators are to be taught in,

the radio teach-in telegrams must be triggered consecutively.

Summary of Contents for RBW322-FTL

























Search results

Summary of Contents for RBW322-FTL

Reviews:

Related manuals for RBW322-FTL

Brands by name

Popular brands

Kieback&Peter RBW322-FTL, Product Description

Search results

Summary of Contents for RBW322-FTL

Reviews:

Related manuals for RBW322-FTL

Brands by name

Popular brands