background image

6

Safety

Issue 2015-01-19

A

2.3 Intended use

In combination with a radio partner, the MD15-FTL-902 constitutes a functional unit for 
easy room temperature control.
Observe the following to operate the device correctly:

Only operate the device at an ambient temperature of 32..122 °F (0..+50 °C).

Do not operate the device in wet or moist environments. 

Do not operate the device in a potentially explosive environment.

Only use the device with radio partners that are compatible with the EnOcean radio-
gram EEP A5-20-01 (Battery Powered Actuator).

Only operate the device in its original condition and as described in these operating 
instructions. 
Modifications to the device could result in unforeseeable dangers and are thus prohib-
ited.

2.4 Responsibilities of the operator

You may only operate the device if it is technically sound and in safe working order. The 
operator must observe the following items:

Make sure that only qualified service technicians perform assembly, installation and 
commissioning.

Ensure that these operating instructions are available to the user.

Ensure that the user has read the operating instructions (particularly the chapters on 
safety and safety instructions) before starting work with the room control module.

If the device becomes damaged or if a malfunction message is issued (other than a 
battery change), you must inform your service technician.

Make sure that the valve was installed properly.

2.5 Basic safety instructions

The basic safety instructions summarize safety measures according to topic and are 
applicable at all times. 

2.5.1 Behavior in hazardous situations

Observe the following in hazardous situations:

Before starting work, familiarize yourself with the location of the safety, accident alert 
and first aid equipment and how to use it.

This ensures that you can quickly provide assistance and/also help to prevent hazards in 
advance.

Summary of Contents for MD15-FTL-902

















Reviews: