Vehicle
ON / OFF Switch
ON / OFF Switch
Fig. 1
Fig. 2
For Transmitter
(Fig. 3 and Fig. 4)
1. Switch OFF the power.
2. Slide to open the battery cover.
3. Install 2 new AAA battery with correct
polarity (+/-) as shown inside the
battery compartment.
4. Close the battery cover.
5. Tighten the screw on the battery cover.
1. Turn on the Vehicle.
2. The LED light of the Transmitter will keep flashing for the binding process, which is within 8 seconds. Do not turn off any buttons while in progress,
otherwise,the process will be terminated.
3. After the wheels of the Vehicle turn left and right and the LED light of the Transmitter stops flashing, the binding process completed for playing.
4. If it cannot complete within 8 seconds, please turn off both Vehicle and Transmitter and re-start the binding process.
5. When the binding process is done, whenever switching the Vehicle and Transmitter on and off, it searches for the code that it memorized, and will only lock
on to theTransmitter signal containing that code.
6. Please turn off both Vehicle and Transmitter and re-start all binding process if changing to another 2.4GHz Transmitter for playing.
1. The 3.7V rechargeable battery pack must be charged before use by utilizing the battery charger which included.
2. Do not overcharge the battery pack. Do not charge for more than 4 hours.
3. Do not charge the battery pack if it shows leakage, corrosion, or has loose or exposed wires or other damage.
4. Do not cover the battery pack with any sort of materials while charging.
5. Do not touch the battery pack when it is hot. Wait until the battery pack cools before installing it in the Vehicle and before recharging.
6. Do not dispose of the battery in fire.
7. Do not dismantle the battery or charger, and do not cut the battery or charger cables.
8. The battery pack will be warm after charging, and hot after use in a vehicle.
9. The supply terminals are not to be short-circuited.
10. Rechargeable batteries are only to be charged by adults.
11. Battery replacement must be only made by adults.
12. The transformer (charger) is not a toy.
13. Charge only type (250mAh Max.) rechargeable battery packs. Other types of batteries may burst causing injury to persons and damage. This power unit is
intended to be correctly orientated in a vertical or floor mount position. This charger is intended to be used for charging 3.7V rechargeable battery pack with
capacity 250mAh Max. It cannot be used for charging non-rechargeable batteries. Regular examination of battery charger for any damage to their cord, plug,
enclosure and other parts, and that, in the event of such damage, it must not be used with the charger or battery pack charge until such damage has been
repaired. Note that the AAA battery is non-rechargeable and is not to be recharged. Only batteries of the same or equivalent type as recommended are to be
used. It will need replacement when transmission is poor.
14. Exhausted batteries are to be removed from the product.
15. Non-rechargeable batteries are not to be recharged.
16. Different types of batteries or new and used batteries are not to be mixed.
17. Rechargeable batteries are to be removed from the toy before being charged.
18. Batteries are to be insertde with the correct polarity.
19. The toy is only to be connected to Class II equipment bearing the symbol
回.
20. The packaging has to be kept since it contains important information.
Transmitter
Once the fully charged Battery Pack is inserted into the Nano Vortex and the Transmitter is likewise prepared you are ready to play
with your Nano Vortex! Operation of the Nano Vortex is simple as described below. See what sorts of stunts you can come up with!
1. Ensure that the On / Off Switches on the Nano Vortex and the Transmitter are in the On position.
2. Move the Left and Right Sticks on the Transmitter and also twist the Transmitter to drive the Nano Vortex. Twisting the Transmitter will
twist the Nano Vortex under certain circumstances. It is recommended to experiment with this feature and develop your own stunts. Let
the off-road stunt driving begin! The following is a table of Nano Vortex Transmitter Stick inputs and their functional results.
3. If your Nano Vortex’s Battery Pack becomes depleted, you will need to recharge your Battery Pack as outlined in the section:
"Charging
the Rechargeable Battery Pack for the Vehicle"(P.1)
.
4. When you are finished playing with your Nano Vortex or if the Battery Pack is depleted, turn off the Transmitter and the Nano Vortex.
Battery Precaution
How to bind
Battery Installation
Operating The Nano Vortex
Right Stick
- Controls Forward /
Reverse speed on
right side wheels of
Nano Vortex
Left Stick
- Controls Forward /
Reverse speed on
left side wheels of
Nano Vortex
Antenna
Power On LED
On / Off Switch
AAA
AAA
Left Stick
Neutral
Up
Down
Up
Down
Up
Down
Neutral
Neutral
Right Stick
Neutral
Up
Down
Down
Up
Neutral
Neutral
Up
Down
Function
Nothing
Forward
Reverse
Spin Right
Spin Left
Forward & Turn Right
Reverse & Turn Left
Forward & Turn Left
Reverse & Turn Right
Fig. 4
Fig. 3
FPO
FPO
FPO
FPO
FPO
FPO
FPO
