KIDWELL 5901130079575, User Manual

Page: 18 / 28

18
To mount the wheels, connected them to the bottom of the frame casing
by pressing upwards. The wheels have a foot brake, when it is directed
downwards it means that it is active, to deactivate the brake just pull it up.
To remove the wheels from the bottom of the frame, simply lift the frame slightly and
pull out the wheels.
NOTE: make sure the wheels are well connected and the pin is inside the casing
NOTE: when the wheels are not in use, keep them away from children.
6
Adjusting the backrest
To adjust the backrest angle, pull the handle on the back the backrest. There are
5 possible backrest positions.
7
8
USE
Adjusting the length of the seat belt
You can change the length of the harness to match the weight and height of a child by
either pulling or loosening the straps. To release the harness, push the button on the
buckle. The fi rst step after inserting a child into the chair should be to fasten the seat
belts and make sure that they are well-fi tting: close to the body but with enough space
for the child to sit comfortably.
WARNING: Make sure that the child is not touching any part of the buckle while it is
being strapped-in.
9
it through the hole, pulling the belt out. After removing the seat belts, it is possible to
remove the seat cover, in order to do that, release the clasp that are located on the
guides of the feeding tray - from the outside
Adjusting the seat
At the same time, press and hold the adjustment buttons on the sides of the chair.
There are 8 levels to choose from.
Storing the tray and folding the chair
A. Remove the tray from the guide, attach it to the specially made hangers on the
back legs of the frame.
After attaching the tray on the hangers you can fold the chair by pressing the
buttons as shown on pic.
WARNING: with the folded chair, the tray can be mounted at the back only when
the seat is set at the highest level
B. You can also store the tray by sliding it out further than the 2 feeding positions
and lifting it to an upright position - this is the storage position
10