Young Explorer setup guide
page 24
26
NN
NN
MM
Secure monitor bracket
(MM)
using 2 monitor locking
nuts
(NN)
. Do not tighten locking nuts yet .
[28]
Unpack the monitor. Do not assemble the tilt swivel
base provided with your monitor . If tilt swivel base is
already assembled to your monitor, you will need to
remove it before continuing. Position flat screen
monitor on top of cabinet in front of monitor bracket
(MM). Route signal cable through opening in cabinet-
upper panel (E) .
[29]
Slide monitor bracket forward until flat screen
rest against the monitor bezel’s protective lens .
Tighten monitor bracket knobs . Close and lock doors
(N)
using keys
(Y)
.
Caution for monitors with ON/
OFF switch on front:
be sure monitor switch remains
in the ON position when sliding bracket and monitor
forwardagainst bezel’s protective lens .
[30]