SLIDE ASSEMBLY
Before you begin this step
remove the mounting hardware from the
Slide Handles and Legs, you will need this hardware during assembly.
1.
Insert the Ladder Leg down through the holes at the top back of the
Slide. Align the holes in the Ladder Legs with the holes on the top of
the Slide.
2.
Insert the Slide Support Legs into the holes located under the Slide
and up through the slide and into the Ladder Leg. Align the holes of
the legs with the holes in the Slide Top.
3.
Place an Inner Leg Support Brace between both sets of Legs. Align
all the holes of the legs with the holes and connect the Slide, Ladder
Legs, and Inner Leg Supports by inserting a long screw through the
Lon
M6*58mm*4pcs
g Screw
Flat Washer
8
12
12
4
Ladder Legs
Support Legs
insert up into
Ladder Leg
Align Ladder
Leg hole and
Slide hole here
Align Ladder Leg hole.
Support Leg hole and
Slide hole here
3
2
