7
8
Assembly
Assembly
Unpack all contents and please check that all parts are present before
starting assembly. Please see
PARTS
LIST
on page 2. After checking all
parts are present discard the packaging materials.
WARNING:
Please make sure children are at a safe distance while you are
opening the stroller.
Open the stroller
First protect the floor with cardboard, blanket, or small rug until wheels
have been installed. Next, locate the two buttons on the handle sliding
button across with your thumb and then squeeze button with your
fingers simultaneously to unlock the stroller. Pick up on the handle to open
then release both buttons and continue until you hear a “click” and the
stroller is in the fully open position shown in Figure 1.
Assemble front wheels
The front wheels are interchangable and can be installed on either side of
the front of the stroller. Insert the front wheel set peg into the plastic
base until you hear a “click” shown in Figure 2.
Figure 2
1.
2.
3.
Figure 1
2
2
1
3
3
Assemble rear wheels
The back wheels are NOT interchangable and can only be installed on
the correct side. Put both wheels on floor with the break towards back.
Locate the button locks in the cog hole and position to the outside. AFter
locating the left and right wheels, align the cog hole with the rear leg
tube, push into until you hear a “click” shown in Figure 3. If you did not
hear a click, and you can pull the wheel downard it is on the wrong side.
Assemble canopy
Align the canopy plastic peg with the slot then press tightly to insert the
peg into the slot shown in Figure 4. To disassemble, press both tabs on
the back side and pull the peg from each slot.
Assemble bumper bar
Align the bumper bar pegs with the holes in the front of the seat and
insert into until you hear a “click” shown in Figure 5. To disassemble, press
down on the button of the bumper bar and pull out one side.
.
1
2.
3.
Figure 3
4
Figure 4
3
4
Figure 5
1
3
5
5
Summary of Contents for Deluxe Light Weight Compact Stroller
Page 7: ......
